User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
57
AP-75770 – Rev 1.1 -19/11/2007,
4.3.3 Setting media type
Introduction:
When you have loaded the media in the CS9060, you will have to set the media type. The Media setup menu
is displayed after the media hold lever is pushed from the backward position to the forward position. (= lever
down)
1
No. Name
1
Media hold lever
Notes
The printer starts the media initialization without setting the media type when
•
The [Cancel] key of the operation panel is pressed.
•
No key operations are performed on the operation panel for 10 seconds.
Procedure:
Step 1 :
Verify that the printer has been switched ON, and the media has been loaded.
Result: After the media is loaded, the display shifts to the Media setup menu.
