User’s Guide Océ CS9060 printer
Chapter 2: Product overview
19
AP-75770 – Rev 1.1 -19/11/2007,
2.2 NAME OF THE PARTS AND FUNCTIONS
2.2.1 Front section
13
1
4
12
2
13
3
10
11
5
8
9
6
5
10
7
12
N° Name
Function
1
Media loading lever
Used to fix or release the media.
•
Lower the lever to fix the media.
•
Lower the lever further to fix the media more firmly. Used to improve the
accuracy of media feeding.
•
Raise the lever to release the media.
2
Operation panel
Operation condition setting, printer display and various function settings are performed.
3
Front cover
Used to prevent that a user comes in contact with the driving mechanism during the
printer operation. Opened and closed when media is set or jammed. It is normally closed.
4
Waste fluid tank
Used for collecting waste ink discharged from the printer.
5
Stand
To install the printer on a levelled floor.
6
Media guide
Used to feed the media smoothly when the media is set or printed. The printer has also
an incorporated heater (after heater) to dry the ink.
7
platen
Installed inside of the front cover.
The heater (platen heater) to dry ink is installed.
8
pressure rollers
Installed inside of the front cover.
Press and hold the media when printing.
9
Media cut groove
Installed inside of the front cover.
Used to cut media straight.
10
Maintenance cover
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
•
When cleaning the wiper.
•
When cleaning around the printer.
It is normally closed.
11
Waste fluid valve
Open and close when discharging the waste fluid from the waste fluid tank. It is normally
closed.
12
adjuster
Used to install the printer horizontally
13
Media retainers
To prevent media to curl up at the sides. This way you avoid head strikes and damage.
