User’s Guide Océ CS9060 printer
Chapter 2: Product overview
20
AP-75770 – Rev 1.1 -19/11/2007,
2.2.2 Rear section
2
4
1
5
6 7
1
3
No. Name
Function
1
Roll media holders
Used to load the roll media.
Include flanges where roll media is attached, and the levers that fix the
roll media holders.
2
Media feed slot
Used for feeding media
3
Ink cassette slot
Insert the ink cassette
4 Media
guide
Used for smoothly feeding through media when the media is set or
printed.
The CS9060 printer also incorporates a pre-heater element to warm up
the installed media before printing.
5
AC inlet
Used to connect the power cables.
6
USB connector
Not used for this printer
7
Network interface
connector
Connects a network interface cable.
Notes
•
There are two optional winding systems available for the Océ CS9060
o
Unwinder/Winder 100
o
Motorized winding system with tensioning (T winder)
•
Please refer to the User Guide of the chosen system to know how to correctly load media
Refer to the pricing sheet for more details of these systems.
•
If you do not use one of the above winding systems. You have to use the scroller which is supplied with
the printer.
