User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
81
AP-75770 – Rev 1.1 -19/11/2007,
4.7 PANEL SETUP MENU
In the table below you will find the complete menu structure and its function:
Setup item
Description
Set1: MediaType
Set up the media type for printing.
Set2: Effect
Set up the Effect menu.
Set3: Flushing
Set up the Flushing operation while printing.
Set4: Side Margin
Set up the right and left margin when printing.
Set5: Media Initial
Set up whether the media width and edge are detected when initializing the
media.
Set6: Media
Width/MediaWidth
Set up the media width from the loading mark to the left end if media detection
is not performed when initializing the media.
Display the detected media width if media detection is performed when
initializing the media.
Set9: Origin
Set the start position of the printing data.
Set10: Prev. Stick
Set up to prevent media from sticking when printing.
Set11: HeadFan
Set up head fan operation
Set12: CR Movement
Set up the distance to move the print head while printing.
Set13: Overwrite Cnt
Set up the Overwrite Cnt per swath.
Set14: Overwrite Wait
Set up the waiting time while overwrite printing.
Set15: Slant Check
Set up the slanting detection between two consecutive print jobs
Set16: Auto Cleaning
Set up the auto cleaning time while printing.
Set17: Ink Status
Display the remaining ink level of the ink cassette that was installed into the ink
cassette slot.
Set18: Roll Length
Set up the roll media length.
Set19: Head Wash
Unlocks carriage from home position in order to be able to clean the wiper.
Set20: CR Maintenance
Clean the wiper.
Set21: Initialization
The parameter values of the printer are restored to their factory defaults
Set22: Life Times
Display the operational life time of each part.
Set23: IP Address
Set the IP address of the printer.
Set24: Subnet Mask
Set the subnet mask of the printer.
Set25: Gateway
Set the Gateway.
Set26: Temporary
The settings of "OFF" or "ALL OFF" in the Selection menu are displayed in the
setup menu temporary.
—
[Cancel] key: Shift to the previous hierarchy.
