Oce Eco Solvent CS9060, User Manual

Page: 83 / 139

User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
83 AP-75770 – Rev 1.1 -19/11/2007,
4.7.1.2 Print Mode menu
Set up the printing mode according to the used print data or print speed.
Resolution
print mode
Head Media
Print Passes Dir
Drop Family/
Drop Size
(2)
Head
Speed
(3)
Max. Print Width (mm)
quality1 1440 1440 16 uni Small Slow 1615
quality2 1440 720 8 uni Small Slow 1615
quality3 720 720 8 uni Small Slow 1615
quality4 720 720 8 bi Small Slow 1615
quality5
(1)
720 720 8 bi Large Slow 1615
graphics1 720 720 8 uni Small Fast 1615
graphics2 720 720 8 bi Small Fast 1615
graphics3
(1)
720 720 8 bi Large Fast 1615
banner1 540 720 6 uni 14 ng Fast 1615
banner2 540 720 6 bi 7 ng Fast 1615
banner3 720 720 4 uni Small Slow 1615
banner4 720 720 4 bi 14 ng Fast 1615
Remark:
Print width: 1615 mm
(1)
Print modes only selectable via RIP and not visible on the panel
(2)
Large Drop Family - VSD1 : 7 – 14 – 21 ng / Small Drop Family - VSD3 : 3.5 – 7 – 12.5 ng
(3)
Head speed: Slow = ± 240 cps = 610 mm/s and Fast = ± 320 cps = 813 mm/s
cps = 0.1 inch per second
(4)
If i²/Waving is switched OFF, the print speed increases by approximately 4%.
4.7.1.3 Dist.Adj menu
Various settings on the Media feed compensation can be set.
Setup Item Setting Value Description
Init.Adj.Print
Perform the initial adjust print.
•
[Enter] key: Shift to the next hierarchy.
Init.Adj.Change
Set up Initial Adjust Change.
•
[Enter] key: Shift to the next hierarchy.
Confirm Print Perform the Confirm Print.
•
[Enter] key: Shift to the next hierarchy.
Micro Adj. Print Perform the Micro Adjustment Print.
•
[Enter] key: Shift to the next hierarchy.
Micro Adj.Change
Set up the Micro Adjustment Change.
•
[Enter] key: Shift to the next hierarchy.
PF
—
•
[Cancel] key: Shift to the previous hierarchy.