User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
87
AP-75770 – Rev 1.1 -19/11/2007,
4.7.2 Effect menu
Use this menu to improve the print quality by means of intelligent interweaving print algorithms (i²)
Setup Item
Setting Value
Description
None 1
None 2
The effect function is not used. If obvious white lines or uneven
print density appear on the printed media in “ None1”, set it to
“None2”
<Wave 1>
Wave 2
The printing joint will be the wave form. It will improve the print
quality. If obvious white lines or uneven print density appear on
the printed media in “ Wave 1”, change the setting to “Wave 2”
Fuzz 1
Fuzz 2
This waveform gives a fuzzy joint between the consecutive print
passes improving overall print quality.
Set up this menu when obvious white lines or uneven print
density appear on printed media in “Wave”.
If obvious white lines or uneven print density appear on printed
media in “Fuzz 1” set “Fuzz 2”
Fine&Wave 1
Fine&Wave 2
Fine&Wave 3
Fine&Wave 4
Perform printing at a slower speed compared with “Wave” Set
up this menu when you want to improve the print quality
compared with “Wave”. If obvious white lines or uneven print
density appear on the printed media in Fine&Wave1, change the
setting to the one with the best print result in “Fine&Wave 1 to 4”
A-S.Fine&Wave
Performs “Wave” printing using one side of the nozzles of the
print head. Since only one side of the nozzles is used, printing
speed becomes half of “Wave1to 4”.
Set up this menu when you want to improve the print quality
compared with “Fine&Wave1 to 4”
B-S.Fine&Wave
Performs “Wave” printing using the other side of the nozzles of
“A-S.Fine&Wave” since only one side of the nozzles is used,
printing speed becomes half of “Wave1to4”. Set up this menu
when you want to improve the print quality compared with
“Fine&Wave1 to 4”
Effect
—
•
[Enter] key: Save the setting and shift to the previous menu.
•
[Cancel] key: Cancel the setting and shift to the previous
menu.
Refer to: Setup menu
4.7.3 Flushing menu
Setup Item
Setting Value
Description
Origin
Flushing is done in the spitting box.
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
<On Media>
Flushing is done on the page margins.
•
[Enter] key: Save the setting value and shift to the previous
hierarchy.
Refer to: Flushing return count menu
Flushing
—
•
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
