User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
93
AP-75770 – Rev 1.1 -19/11/2007,
4.7.16 Roll Length menu
Setup Item
Setting Value
Description
<OFF>
Roll Length is not used.
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
Roll1
Roll2
Roll3
Set up the roll media length.
The Roll Length setting can be set for "Roll1" to "Roll3".
•
[Enter] key: Save the setting and shift to the next
hierarchy.
Refer to:
Roll length menu
Roll media
—
•
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
4.7.16.1 Roll media Length menu
Setup Item
Setting Value
Description
1m to <30m> to 99m
Set the roll media length.
Notes
•
When replacing the roll media, adjust the roll media length
again.
•
If the roll media length is not set, the residual quantity of roll
media will not be displayed correctly.
Length
—
•
[Enter] key: Save the setting value and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
4.7.17 Head Wash menu
Notes
•
Make sure to use a genuine cleaning fluid (model No.: 29952256).
Setup Item
Setting Value
Description
Start
Perform head cleaning.
•
[Enter] key:
Perform the head cleaning operation.
The operation panel displays the following contents.
Head Wash
Remove
cassettes
Remove the ink cassette, and install the cleaning cassette.
Refer to:
Replacing ink cassettes
—
•
[Cancel] key: Shift to the previous hierarchy without the head cleaning
operation.
Refer to: Setup menu
