User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
60
AP-75770 – Rev 1.1 -19/11/2007,
Step 3 :
Close the front cover.
1
No. Name
1 Front
cover
4.3.5 Step adjustment
After every printed swath, the media is fed a certain distance. Depending on the kind of media (weight,
backing) another media feed compensation has to be set. This to avoid the following phenomenon:
•
Printed swaths overlap.
•
White lines between every swath.
In such cases, follow the procedure below and adjust the media feed compensation value.
Step 1 :
Display the Media feed compensation menu on the operation panel.
Step 2 :
Press the [Menu] key on the operation panel.
•
Shift to the Setup menu display.
•
The operation panel displays "Menu 1: Setup>".
Step 3 :
Press the [>] key on the operation panel.
•
The operation panel displays "Set1: MediaType".
Step 4 :
Press the [Enter] key on the operation panel.
•
The operation panel displays "Media: Type 1".
Step 5 :
Press the [+] key or [–] key to select the media type you wish to use.
Step 6 :
Press the [Enter] key on the operation panel.
•
The operation panel displays "**>1: Print Mode".
Notes
•
The selected media (Type 1-30) is displayed in "**". Please refer to “
Media Type menu”
•
Press the [+] key or [–] key to select "**>2: PF Adjust>".
•
Press the [>] key on the operation panel.
o
The operation panel displays "PF1: Initial Print".
