Oce ColorWave 600 User Manual Download

Page: 203 / 324

203

Load a media roll

Align the roll with the correct
size indicator on the roll
holder (At the left and right
hand side).
Release the handle of the
locking mechanism.

[240]

Remove the two tapes from
the new media roll. Use both
hands (as indicated) to place
the media roll in the media
drawer.

[241]

Keep the media tight on the
roll and in-line with the side
edge.

[242]

Remove the tapes from the
new media roll. Use both
hands to slide the media under
the metal paper guide. A
"beep" confirms correct paper
transport.

[243]

Step

Description

Illustration

Summary of Contents for ColorWave 600





































































































































































































































































































































Search results

Summary of Contents for ColorWave 600

Reviews:

Related manuals for ColorWave 600

Brands by name

Popular brands

Oce ColorWave 600, User Manual

Search results

Summary of Contents for ColorWave 600

Reviews:

Related manuals for ColorWave 600

Brands by name

Popular brands