Oce ColorWave 600, User Manual

Page: 218 / 324

218 Chapter 7 Print quality and Print productivity
Set the 'Color mode'
Set the 'Color mode'
Introduction
Use the Océ Express WebTools to set the printer's default setting for the 'Color mode'
for a print job.
Note:
If you select this setting in your print job submission application (Océ
Windows
®
printer driver, Océ Publisher Pro or Océ Publisher Select) and the Océ
job ticket is enabled, the value of this setting will overrule the default value.
You can choose one of the following options.
■
'Grayscale'
The system only prints grayscale. The print speed increases in the grayscale
mode.
■
'Color'
The Océ ColorWave
™
600 prints all the colors.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the color mode
1.
Click 'Preferences'- 'Print job defaults' - 'Basic'.
2.
Click 'Edit' in the 'Basic' bar or click the value of the 'Color mode' setting.
3.
Select 'Grayscale' if the print productivity is the most important factor.
4.
Select 'Color' if the print quality is the most important factor.
Note:
The color "black" also looks nicer when printed in color. In that case all
colors (cyan, magenta, yellow and black) are used to produce black, and not only
black toner.
5.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.