37
N V I D I A C o r p o r a t i o n
C h a p t e r 5
U s i n g n V i e w M u l t i - D i s p l a y M o d e s : D u a l v i e w v s . S p a n / C l o n e
Figure 5.3
nView Span/Cone Modes Available: Windows XP (2000)
• nView Dualview Mode
has no special “nView multi-display mode” user
interface because Dualview support conforms to the standard Microsoft user
interface. The “Standard” mode in the panel shown in
can be
thought of as Dualview in that it is
not
Span or Clone mode.
Note:
When you start
Windows 9x
or
Windows XP
using multiple displays,
Windows is pre-configured for Dualview mode. This is not the case for
Windows 2000. NVIDIA provides a special feature to “Enable
Dualview” in Windows 2000.
For details on using Dualview mode, see the following sections:
•
“Key Features of nView Dualview Mode” on page 38
•
“Enabling nView Dualview Mode for the First Time: Windows 2000” on
•
“Enabling nView Dualview Mode After Initial Session: Windows 2000”
•
“Activating nView Dualview Mode: Windows XP” on page 45
•
“Activating nView Dualview Mode: Windows 9x” on page 48
.
nView Span and
Clone modes
are
accessible
when Dualview
mode is
disabled
.
.
nViewGuide_.book Page 37 Monday, August 11, 2003 4:03 PM