Nvidia Detonator FX Drivers, User Manual

Page: 95 / 155

N V I D I A C o r p o r a t i o n
88
N V I D I A D i s p l a y P r o p e r i t e s U s e r ’ s G u i d e
C
H A P T E R
D
EVICE
S
ELECTION
A
ND
C
ONFIGURATION
This chapter contains the following major sections:
•
“Switching Displays in nView Span, Clone, or Standard (Dualview) Mode”
on page 88
• “Switching Displays in Dualview Mode” on page 93
• “Device Adjustments: Analog Display (CRT)” on page 97
• “Device Adjustments: Flat Panel” on page 99
• “TV Settings” on page 102
Switching Displays in nView Span, Clone, or Standard
(Dualview) Mode
If you have the nView Display Mode (Standard (Dualview), Span, or Clone)
enabled and have multiple display devices connected to your computer, you can
easily switch between the displays by following these steps:
1
Right click on the monitor image of the secondary display device (2) if you
are in Span or Clone mode; or, if you are in Standard (Dualview) mode,
simply right click on the single monitor image that appears.
2
Click Select Output Device.
3
Then click the display device you want to switch to.
Select the output display device (monitor, digital flat panel, or TV)
depending on the devices your graphics processor supports.
nViewGuide_.book Page 88 Monday, August 11, 2003 4:03 PM