Nvidia Detonator FX Drivers, User Manual

Page: 64 / 155

57
N V I D I A C o r p o r a t i o n
C h a p t e r 5 U s i n g n V i e w M u l t i - D i s p l a y M o d e s : D u a l v i e w v s . S p a n / C l o n e
Enabling nView Span/Clone Modes: Windows XP
Note: Under Windows XP, you do not need to restart your computer to switch
between nView Span/Clone Mode and Dualview mode.
When you are in Windows XP Span or Clone mode, your Windows Display
Properties Settings panel shows at least “two” monitor images, unlike Windows
2000, which shows only one monitor image.
To disable Dualview mode and, therefore, make nView Span and Clone modes
accessible, follow these steps:
1
Open the Windows Display Properties Settings panel.
2
Right click the monitor image 2 and click Attached so that the option
becomes unchecked .
3
Click Apply ( Figure 5.26 ). This turns off your secondary display. (To access
nView Span and Clone modes, only one monitor needs to be enabled on the
Display Settings panel.)
4
Be sure to click the display image 1 so that it is the selected display.
Figure 5.26
Disabling Dualview Mode: Windows XP
5
Click Advanced to display the NVIDIA GPU tab shown in Figure 5.27 .
6
Click the NVIDIA GPU tab to display the nView Display Mode option in
the Media Center menu, as shown in Figure 5.28 .
nViewGuide_.book Page 57 Monday, August 11, 2003 4:03 PM