NSD VARICAM VS-5F Series, Specifications And Instruction Manual

Page: 65 / 130

55
OPERATION 7. HOW TO USE BASIC FUNCTION
POINT
*1: SW-ON LED and OFF LED switch when [ON / OFF] key is pressed every time.
Turns ON the SW-ON LED when setting the ON angle.
Turns ON the OFF LED when setting the OFF angle.
*2: ON and OFF angle must be set together.
In the case of setting only ON angle and go to different operation, the screen displays “u17 (‘No setting’ error)”.
⑤
Turns ON the OFF LED. *1
Presses [ON / OFF] key in order to designate
the OFF angle. The OFF LED turns ON.
⑥
Inputs the OFF angle value.
Inputs the OFF angle value by
pressing [+] or [-] key of POSITION, and
then the value blinks in the POSITION
display area.
Setting range: 0 to 359.5
°
If [CLR] key is pressed in this timing, the inputting
value will be canceled.
⑦
Enters the OFF angle value. *2
Presses [SET] key, and then POSITION
display area turns ON.
The OFF angle value is entered.
⑧
Repeats below procedure.
Repeats procedure
②
to
⑦
until number of switch outputs which you need.
Operates from procedure
①
when setting the switch output to different program.
By 10
°
units
By 0.5
°
units
OFF LED
is ON
Displays by 0.5
°
units
Decimal point is ON : 0.5
°
Decimal point is OFF : 0.0
°