- 52 -
7.1.5 One
Command
Execution
Only one command of the register commands, which is displayed in data edit, is performed. Select an axis by X/Y key and press
EXC key, the command of the currently displayed register is executed; however, the executable commands are only ABS, INC,
OUT, OTP and HOM1~4. When other command is registered, no operation is performed by EXC key. Although this function
usually performs for only one axis, if Both is set in X axis, ABS, INC or HOM1~4 command is simultaneously performed for both
X and Y axes by EXC key of X axis.
7.2 Drive
Operation
Drive operation performs jog feed, home search and program execution. When dp is displayed in REG, it is drive operation. When
the register number is displayed, press DP key to switch to drive operation.
In drive operation, the current position of the selected axis is displayed in DATA.
As shown on the left side of input keys in yellow, the upper row of keys is for X axis and the lower is for Y axis. Each key
function is shown on the top of input keys in yellow. However, DP key has only the function to switch data edit and drive
operation.
7.2.1 Home
Search
Keys for home search are as follows:
Display in Yellow
Input Key
Operation
X HOME
5
Ｘ
axis Home Search Execution
Y HOME
0
Y axis Home Search Execution
It is possible to operate both X and Y-axes simultaneously. If the user wants to abort home search, press STOP key of each axis.
[Note]
Driving mode, parameters and home search mode must be configured before execution of home search. Or home search
can fail to perform.
DATA Digits
８
７
６
DCC Pulse Width
(
μ
sec)
０
０
０
10
０
０
１
20
０
１
０
100
０
１
１
200
１
０
０
1000
１
０
１
2000
１
１
０
10000
１
１
１
20000
X
Y
Current position of selected axis
I nput keys
Key di spl ay f or
dri ve operati on
