- 13 -
■
Power On Program Start
Selects either Disable or Enable for automatic program start at power-on.
Display Option
Default
Power On Program Start
Disable / Enable
Disable
Power On Program Start is the function to perform automatically the registered program from REG00 when the power is on or
motor control unit is reset. If Power On Home Search Start is also enabled, the program will be performed after completion of
home search operation.
[Note]
(1) When using Power On Program Start, write timer command to REG00 in advance, then make sure that next command is
operated after passing the specified period. In addition, it recommends to embed home search command into the program.
(2) Do not release Power On Program Start or Power On Home Search Start during driving. Make sure to first stop driving in main
screen (click STOP button) and then disable them in parameter/mode screen in advance.
(3) Do not alter the program or mode/parameters while executing the program by Power On Program Start. Make sure to first stop
in main screen (click STOP button) in advance.
