NorthStar 8000I System Operation Manual Download Page 152

Page: 152 / 220

152

Northstar 8000i Operation Manual

5. Select

to confirm the new name.

6. When you are finished, select

Return

28.4

Select the color scheme for an instrument panel

The 8000i provides a choice of preset color schemes for the instrument panel. You
can select any one of these color schemes.

NOTE: If the palette is set to Night or Day, these settings will also be applied to the
color scheme. (See "Select a palette" in the Quickstart.)

To change the color scheme:

1. Select

Display

, then select

Instruments

. If you can't see the

Select Panel

button, select

Return

2. If the current panel isn't the one that you want to change, choose

Select Panel,

then select the instrument panel that you want to

change and select

Return

3. Choose

Color Scheme

to display a list of all the available color

schemes.

4. Select the color scheme that you want, then select

Return

. The new

setting is applied immediately and stays until you change it again.

5. When you are finished, select

Return

28.5

Change the layout of the instrument panel

Use this to change the layout of the instruments on an instrument panel.

To change the layout:

1. Select

Display

then

Instruments

. If you can't see the

Select

Panel

button, select

Return

2. Choose

Select Panel

then select the instrument panel that you

want to change and select

Return

3. Select

Config

then select the instrument that you want to move.

4. Drag the instrument to the new location on the instrument panel. The

yellow lines help you to align the new instrument with the existing
instruments.

5. Repeat this for any other instruments that you want to move.

6. When the new layout is satisfactory, select

Save Changes

7. When you are finished, select

Return

28.6

Resize an instrument

You can use this to change the size of an instrument displayed on an instrument
panel. The instrument can be set to small, medium, or large.

The default size is medium.

Summary of Contents for 8000I





























































































































































































































Search results

Summary of Contents for 8000I

Reviews:

Brands by name

Popular brands

NorthStar 8000I, System Operation Manual

Search results

Summary of Contents for 8000I

Reviews:

Brands by name

Popular brands