manualshive.com logo in svg

NorthStar 8000I, System Operation Manual

Share
Download
NorthStar 8000I System Operation Manual Download Page 105

 

Northstar 8000i Operation Manual

 

105 

16.7

 

Show/hide the depth line 

You can toggle the depth line On or Off. Any change is applied only to your 

Sounder

 screen. On is the default.  

When the depth line is On, you can move it up and down to find the depth of a 
specific object on the 

Sounder

 screen (See Page 105). 

 

To change the depth line setting: 

1. Display 

the 

Sounder

 screen and the control panel. If you can't see the 

Display

 button, select 

Return

. 

2. The 

Depth Line

 button displays the current setting. Select the 

button if you want to toggle to the other setting. The new setting is 
applied immediately and stays until you change it again. 

3.  When you are finished, select 

Return

. 

 

16.8

 

Move the depth line 

The depth line is white horizontal line. You can move this to find the depth of an 
object on your 

Sounder

 screen. Any change is applied only to your 

Sounder

 screen. 

NOTE: If you can't see the depth line, check whether it's On. (See Page 105)  If it 

is

 

On and you can't see it, try changing the range as it may be out of view (see 
"Change the range" page 118). 

 

To move the depth line: 

1. Display 

the 

Sounder

 screen and the control panel. If you can't see the 

Move Depth Line

 button, select 

Display

. 

2. Select 

Move Depth Line,

 then select 

Up 

or 

Down

 to move the 

depth line one step. Repeat if necessary. 

3.  The new setting is applied immediately and stays until you change it 

again. 

4. Select 

OK

 to confirm the new setting. 

5.  When you are finished, select 

Return

. 

 

16.9

 

Change the sounder operating mode 

You can operate the sounder automatically to suit fishing or cruising conditions, or 
manually.  

IMPORTANT: Use cruising mode when you're traveling at speed.   

If you operate the sounder manually, you can change the range and gain to suit 
your own preferences.  The best results are often returned in manual mode but 
the optimum settings for different conditions are usually found only with practice 
and experience.   

 

To change the sounder operating mode: 

1. Display 

the 

Sounder

 screen and the control panel. If you can't see the 

Auto Mode

 button, select 

Return

. 

Summary of Contents for 8000I





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands