Nortel Optivity Switch, Using Manual

Page: 125 / 192

Chapter 6 Using Multicast Manager 125
Using Optivity Switch Manager, Release 1.1.0.0
Menu bar
The menu bar provides menus for operating the Multicast Manager. Table 37
describes the Multicast Manager menus and commands.
Table 37 Multicast Manager menus and commands
Menu Command Shortcut key Purpose
File Reload [Ctrl]+R Reloads the Multicast Manager
information.
Save
Diagnostic
Information [Ctrl]+D Saves the diagnostic information about
the multicast configurations and groups.
Print [Ctrl]+P Opens the Print dialog box, where you
set parameters to print.
Close Closes Multicast Manager.
Edit Undo
Changes [Ctrl]+Z Reverses any changes you made to a
record.
Copy [Ctrl]+C Copies the contents of the selected cell.
Paste [Ctrl]+V Pastes the cell contents when you
select a new location.
Insert [Ctrl]+I Opens the Insert dialog box.
Delete [Ctrl]+D Removes a selection and displays a
message box to confirm deletion.
Apply
Changes [Ctrl]+A Applies changes made to your multicast
configuration to the device configuration
file.
Find [Ctrl]+F Opens the Find dialog box, where you
set parameters to find matching entries
in your network.
Note: In read only mode, except for the Find command, Edit options are
unavailable (greyed-out).