Nortel Optivity Switch, Using Manual

Page: 109 / 192

Chapter 5 Using MultiLink Trunking Manager 109
Using Optivity Switch Manager, Release 1.1.0.0
Viewing isolated devices
Isolated devices have one or more connections to a hub or bus, but are not
connected to another switch.
To view the isolated devices:
The Isolated Device table opens in the contents pane (Figure 45) .
PortMembers Ports that are assigned to the MLT.
PortType Type of port on the MLT (access or trunk).
VlanIds VLAN(s) to which the ports belong.
Enable Whether the MLT is enabled (true) or disabled (false).
IfIndex Interface index, a number from 96 to 4097, that identifies the MLT to
the software.
In the MultiLink Trunking Manager navigation pane, select an isolated
device.
Table 32 No Trunk table fields (continued)
Fields Description