Nortel Optivity Switch, Using Manual

Page: 72 / 192

72 Chapter 4 Using VLAN Manager
208963-B
Figure 25 Configuration table
Table 21 describes the fields in the Configuration table.
Table 21 Configuration table fields
Field Description
Device IP address, system name, or host name of the device.
Priority The Spanning Tree Protocol (STP) bridge priority, in decimal.
The range is 0 (highest priority) to 65535 (lowest priority). The
default is 32768.
BridgeMaxAge The value in hundredths of a second that all bridges use for
MaxAge when this bridge is acting as the root.
Note : The 802.1D-1990 standard specifies that the range for
this parameter is related to the value of dot1dStp\Time.
The default is 2000 (20 seconds).
BridgeHelloTime The value in hundredths of a second that all bridges use for
Hello Time when this bridge is acting as the root. The granularity
of this timer is specified by the IEEE 802.1D-1990 standard to
be in increments of 1/100 of a second. The default is 200
seconds.
BridgeForwardDelay The value in hundredths of a second that all bridges use for
Forward Delay when this bridge is acting as the root. The default
is 1500 (15 seconds).
EnableStp Enables or disables the spanning tree algorithm for the spanning
tree group.
StpTrapEnable Enables or disables SNMP traps to be sent to trace receiver
every time an STP topology change occurs.