Chapter 4 Using VLAN Manager
81
Using Optivity Switch Manager, Release 1.1.0.0
Editing a spanning tree group
To edit a spanning tree group:
1
Select an STG folder.
2
In the STG table in the contents pane, click the item that you want to edit.
The field is highlighted, and you can edit directly in the table.
3
Type information in the text boxes, or select from a list.
The changes appear in bold.
4
On the VLAN Manager toolbar, click Apply Changes.
Deleting a spanning tree group
To delete a spanning tree group:
1
In the navigation pane, select an STG folder except STG 1, and do one of the
following:
•
From the VLAN Manager menu bar, choose Edit > Delete.
•
On the VLAN Manager toolbar, click Delete.
BridgeHelloTime
Value in hundredths of a second that all bridges use for Hello
Time when this bridge is acting as the root. The granularity of this
timer is specified by the IEEE 802.1D-1990 standard to be in
increments of 1/100 of a second. The default is 200 seconds.
BridgeForwardDelay
Value in hundredths of a second that all bridges use for Forward
Delay when this bridge is acting as the root. The default is 1500
(15 seconds).
Enable Stp
Enables or disables the spanning tree algorithm for the spanning
tree group.
Enable Stp Traps
Enables SNMP traps to be sent to trace receiver every time an
STP topology change occurs.
On All Devices
When checked, selects all devices listed in the list. Otherwise,
select the individual devices to be added to the STG.
Table 25
New STG dialog box items (continued)
Item
Description
Summary of Contents for Optivity Switch
