manualshive.com logo in svg

Nokia Alcatel-Lucent OXO Connect Compact, Installation Manual

Share
Download
Nokia Alcatel-Lucent OXO Connect Compact Installation Manual Download Page 74

To restart the session from the beginning during programming.

Attend

To restart the session if you quit using the 

Exit

 function

6.1.2 System type

Choice

: Used to define the system type: Business or Hotel

6.1.3 Installation number

This number must be entered in its entirety.

 The number of your installation can include a maximum

of three fields for a total of 18 digits.

The fields must be separated by an asterisk.

Possible fields include:

• International country prefix (for example: 33 for France): obligatory field.
• National prefix: optional field (has no meaning in France).
• Public number of the installation: obligatory field.

Chapter 

6

Starting the configuration

8AL91217USAA - Ed. 01  - July 2018 - Installation Manual

74/216

Summary of Contents for Alcatel-Lucent OXO Connect Compact

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands