manualshive.com logo in svg

Nokia Alcatel-Lucent OXO Connect Compact, Installation Manual

Share
Download
Nokia Alcatel-Lucent OXO Connect Compact Installation Manual Download Page 137

8.4.1 Connecting the set

To connect the set to the LAN:

• If the set is powered by PoE:

1.

Turn the set over

2.

Plug the RJ9 cable into the set LAN connector

3.

Connect the RJ9 cable to the LAN itself via a PoE hub/switch

• If  the  set  is  not  powered  by  PoE,  plug  the  AC/DC  external  adapter  to  the  set  power  supply

connector and connect the plug to the power supply

Power adapter 

connector (DSCV)

Power over Ethernet (PoE)

 connector (LAN)

8.4.2 Configuring IP parameters

To configure IP settings:

1.

From the local menu, go to the Android settings

2.

Select 

Wireless and networks

 > 

Network

 > 

NOE

3.

Enter the following parameters:

•

IP Parameters

• IP Address
• IP Mask
• Router address

•

NOE

• TFTP server IP address

8.4.3 Initialization

Initialization for 8088 Smart DeskPhone is the same as for 80x8s Premium DeskPhone sets (see 

Set

initialization

 on page 135).

8088 Smart DeskPhone sets initialize in dynamic mode and retrieve IP information automatically.

8.4.4 Binary file download

The 8088 Smart DeskPhone set requires binary files, automatically downloaded at set intialization.

The 8088 Smart DeskPhone application binary is downloaded in background. When the download is
completed and the phone is in idle state, the upgrade starts. While downloading the new firmware, the
phone runs with the current firmware.

Chapter 

8

Device commissioning

8AL91217USAA - Ed. 01  - July 2018 - Installation Manual

137/216

Summary of Contents for Alcatel-Lucent OXO Connect Compact

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands