Nokia Alcatel-Lucent OXO Connect Compact Installation Manual Download Page 55

Page: 55 / 216

OXO Connect
Compact

12V, 4-hour, stack version

1 battery

3EH 76177 AA

12V, 8-hour, stack version

Up to 2 batteries

3EH 76177 AD

Note:
The external battery units for OXO Connect Small, Medium, Large platforms are pre-wired and delivered with inter-
battery connectors.

In addition, you will need:

• 12V - 7Ah batteries (reference: 3EH 76156 AA)
• A connection kit (reference: 3EH 75031 AA) for connecting the external battery unit to the OXO

Connect platform.

4.3.3.3 Power Supply Reference

Type

Reference

110-230V power supply for OXO Connect S platform

3EH 05009 AC

230V power supply for OXO Connect M platform

3EH 05012 AC

110V power supply for OXO Connect M platform

3EH 05010 AC

230V power supply for OXO Connect L platform

3EH 05013 AC

110V power supply for OXO Connect L platform

3EH 05011 AC

4.3.3.4 Installation of External Batteries for OXO Connect Small, Medium, Large Platforms

You must first prepare the external battery unit for use and then connect this unit to the platform. These
two phases of installation are presented separately below.

You will have to choose the appropriate preparation procedure, according to whether you have a rack
or stack version of the external battery unit.

The connection procedure is the same for OXO Connect M and OXO Connect L platforms, but is
different for OXO Connect S platforms.

4.3.3.4.1 Preparing an External Battery Unit (Rack Version)

Before starting the installation, note that:

• External batteries must be of the same type, must be supplied by the same manufacturer and be

from the same batch run.

• Batteries must be charged prior to installation.

Chapter

Powering and connecting the PBX to the customer LAN

8AL91217USAA - Ed. 01 - July 2018 - Installation Manual

55/216

Summary of Contents for Alcatel-Lucent OXO Connect Compact

























































































































































































































Search results

Summary of Contents for Alcatel-Lucent OXO Connect Compact

Reviews:

Brands by name

Popular brands

Nokia Alcatel-Lucent OXO Connect Compact, Installation Manual

Search results

Summary of Contents for Alcatel-Lucent OXO Connect Compact

Reviews:

Brands by name

Popular brands