manualshive.com logo in svg

Nokia Alcatel-Lucent OXO Connect Compact, Installation Manual

Share
Download
Nokia Alcatel-Lucent OXO Connect Compact Installation Manual Download Page 39

4.1.1.2 Mounting in the 19" Rack

Right-hand  

support rail

Left-hand  

support rail

Unit locking studs

4.1.1.2.1 Recommendations

Before installing the system in a 19" rack, you must verify that:

• The  maximum  static  load  (given  by  the  manufacturer)  of  the  19"  rack  is  greater  than  the  overall

weight of the equipment mounted or to be mounted in the rack.

• Moreover, the weight of the equipment must be evenly distributed between the brackets.
• If mounting the OXO Connect platform results in exceeding the load on the front supports (generally

the  total  weight  divided  by  two),  the  platform  must  be  placed  on  a  fixed  tray  attached  to  the  four
supports of the rack.

4.1.2 Environment

4.1.2.1 Climatic Conditions

•

Operation

•

Temperature

:  for  maximum  reliability,  it  is  recommended  you  comply  with  an  ambient

temperature  of  between  5  and  40  degrees  Celsius,  with  a  maximum  variation  of  5  degrees
Celsius per hour.

Chapter 

4

Powering and connecting the PBX to the customer LAN

8AL91217USAA - Ed. 01  - July 2018 - Installation Manual

39/216

Summary of Contents for Alcatel-Lucent OXO Connect Compact

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands