Nikon Total Station DTM-322, Instruction Manual

Page: 76 / 185

4 Applications
62 Total Station DTM-322 Instruction Manual
Using
[DSP]
to switch between display screens
Press
[DSP]
to switch between the Stakeout display screens. The following screens are
available:
The S-O8 screen is only available if the secondary distance unit is set. For more
information, see
Others settings, page 109 .
Every time you press
[DSP]
, the next screen appears. If you press
[DSP]
in the last screen
(S-O7, or S-O8 if the secondary distance unit is set), the S-O1 screen appears.
To customize the S-O2, S-O3, and S-O4 screens, hold down
[DSP]
for one second. For
more information, see Customizing items in the Basic Measurement Screen (BMS),
page 28 .
To record the stakeout point, press
[ENT]
. PT defaults to
the last recorded PT+1.
Press
[ENT]
to record the point.
After recording the point, it returns to the observation
screen. You can continue observation, or press
[ESC]
to
input another angle and distance for stakeout.
Specifying the stakeout point by coordinates
1. To start a stakeout by coordinates, press
[2]
or
select
XYZ
in the Stakeout menu.
2. Enter the point name that you want to stake and
press
[ENT]
.
You can also specify the point by code or radius
from the instrument.
S-O1 S-O2 S-O3 S-O4
dHA
←
R
←
OUT
↑
CUT
↑
HA
VA
SD HA
VD
HD HL
V%
HD
S-O5 S-O6 S-O7 S-O8
X
Y
Z dX
dY
dZ rSD
rVD
rHD HD
VD
SD