Nikon Total Station DTM-322, Instruction Manual

Page: 63 / 185

Total Station DTM-322 Instruction Manual 49
Applications 4
The averaged horizontal angle appears. This
value is fixed until the process is finished or
cancelled.
HRx is not updated even if the instrument is
moved.
6. Press
[ENT]
to store the foresight as a CP record.
Check the PT, HT, and CD values. Then press
[ENT]
to record.
Horizontal angle hold
To hold the horizontal angle to the current value, press
[5]
or select
Hold
in the Angle menu.
To set the horizontal angle to the displayed value, press
[ENT]
or the
Set
softkey.
To cancel the process and return to the Basic
Measurement Screen (BMS), press
[ESC]
or the
Abrt
softkey.
Station Setup
To open the Stn Setup menu, press
[STN]
in the BMS.
To select a command from this menu, press the
corresponding number key. Alternatively, press
[<]
or
[>]
to highlight the command and then press
[ENT]
. Press
[^]
or
[v]
to move up or down one page.
The last function used is highlighted.
HRx = HR
∑ ÷
N
HA = BSAz + HRx (normalized)
In repeat angle measurement, the HA is replaced by HR
∑
. The number of repeat angles appears at the top of
the screen (for example, N= 5 ).
Horizontal angles can be measured up to 1999°59'59".
This function stores both raw and XYZ data as CP records, regardless of the Store DB setting.