Nikon Total Station DTM-322, Instruction Manual

Page: 141 / 185

Total Station DTM-322 Instruction Manual 127
Menu Key 5
Uploading a point name list or code list
To upload a point name list via cable, press
[3]
or select
PT List
in the
Communication menu.
To upload a code list, press
[4]
or select
Code List
.
Connect the RS-232C cable.
Start a terminal program on the computer.
To put the instrument into receive mode, press
[ENT]
or
the
OK
softkey.
The counter is updated as each line in the list is stored.
You can store up to 254 codes or point names.
1sec-Keys
Use the 1sec-Keys menu to configure the settings for
the one-second keys,
[MSR]
,
[DSP]
,
[USR]
,
[S-O]
, and
[DAT]
. To
access this menu, press
[6]
or select
1sec-Keys
in the
MENU screen.
[MSR]
key settings
To change settings for the
[MSR1]
and
[MSR2]
keys, press
[1]
or select
[MSR]
in the 1sec-Keys menu.
There are two
[MSR]
keys:
•
To change the settings for the
[MSR1]
key, press
[1]
or select
MSR1
.
•
To change the settings for the
[MSR2]
key, press
[2]
or select
MSR2
.
When you upload a code list, it always replaces the existing code list on the instrument.
If a code or point name is longer than 16 characters, it is truncated.