Nidek Medical ICE mini, Operator'S Manual

Page: 85 / 93

75
CONNECTION AND SETTINGS : Connection
4
{ Settings of the SE-9090 Express
*1: Set the parameters on the Parameter exchange mode screen.
*2: Set the parameters on the system screen for servicing. Ask NIDEK or your authorized distributor
for changing the settings.
*3: Set the parameter to EXEC when the barcode scanner is not connected to the LE-9000. To set the
parameter to EXEC, the LE-9000 software of a certain version or later must be updated.
*4: Never change the factory setting of Mac Address that had been set uniquely for each individual SE-
9090 Express before shipment.
*5: Set these parameters in accordance with the network to which the SE-9090 Express is connected.
Parameter Blocker/LE
Mini LAB
(when the RS232C
port is used)
Blocker LAB
*1 Ext. interface LAN LAN
*1
Communication port/
protocol
RS232C TCP
*1 Baud rate
Select the same baud
rate as the ICE mini.
–
*2 MAC address —
Never change the
factory setting. *
4
*2 IP address —
Set the parameter
uniquely for each
individual SE-9090
Express. *
5
*2 Subnet mask
It is impossible to
connect the SE-9090
Express.
—
Set the parameter
uniquely for each
individual SE-9090
Express. *
5
*2 Gateway —
Set the parameter
uniquely for each
individual SE-9090
Express. *
5
*2 Host IP Address — PC IP address
*2 Host ID ICE mini ID No.: 32 Server ID No.: 32
*2 My ID
SE-9090 Express ID
No.
(Any number except for
the SERVER No.)
SE-9090 Express ID
No.
(Any number except for
the SERVER No.)