Nidek Medical ICE mini, Operator'S Manual

Page: 47 / 93

37
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Lens Layout Data
2
2.3.2 Entering lens layout data for lenses other than Multi
Block the lens aligning to the lens markings or eye point mark of the progressive lens when the lens
type is other than Multi.
According to prescription, enter lens layout data (FPD, PD, and optical center height).
In addition, enter arbitrary value in the Size field if necessary.
Each lens layout data is displayed in the numeric button next to each item button. Pressing the
numeric button displays the numeric keypad.
1
Set the lens type to Other than Multi (Multi in gray).
2
Enter necessary lens layout data.
If any prerequisite item is not entered, the corresponding numeric button(s) is displayed in
yellow.
See the following explanations for the details of lens layout data:
{ Items to be entered in lens layout data
1) FPD (or DBL)
Press the FPD (or DBL) numeric button to display the
numeric keypad. Enter any value and press the Ent
button.
The range of the FPD value is 30.00 to 99.50
mm in increments of 0.01 mm.
Pressing the CE button clears the entered
value. When no value is entered or the value
is not changed, this button closes the numeric
keypad.
When the traced data includes the frame data (both-rim
tracing), the FPD value is automatically entered
together with the traced data.
㧸
/'07 /'07
㧾
˜
!!!!
ь㧩
Ǿ㧩
ь㧩
Ǿ㧩
'PV
%'
%4
5CXG
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
2NCUVKE 5($ 2QNKUJ
)WKFG
4+)*6 .'(6
/WNVK
.QCF 6TCEGT
PD
FPD
Optical center
height ( )