Nidek Medical ICE mini, Operator'S Manual

Page: 50 / 93

40
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Lens Layout Data
4) Size (Enlarged or reduced lateral size of a lens shape)
Enter arbitrary value in the Size field if necessary.
Press the Size numeric button to display the numeric keypad. Enter any value and press the Ent but-
ton.
The range of the Size value is -9.95 to +9.95 mm in increments of 0.01 mm. The minus mark
indicates that the lens shape is reduced and the plus mark indicates that the lens shape is
enlarged.
The lens shape is enlarged or reduced laterally while
maintaining a similar form. At this time, the frame cen-
ter is regarded as the reference position.
For example to the right: Size = +5 mm:
5) Active/Passive (Layout mode)
Selects whether to block the lens with a lens cup at
optical center or at the frame center.
Press the Active (or Passive) button to display the pop-
up menu. Select the mode.
• This function allows one pattern to be used for several different-sized patterns.
• Changing the shape to a different form is also possible.
See “2.4 Shape Change Function” (Page 46) for details.
• Leave the Size value at 0.00 mm when tracing frames. The value is different from the size
compensation value of the lens edger.
Active mode
The lens is blocked with the lens cup at the optical
center.
Passive mode
The lens is blocked with the lens cup at the boxing
(frame) center.
Enlarged shape size
Original shape size
Original shape size + 5 mm
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩 ь㧩
Ǿ㧩
#EVKXG
2CUUKXG
%4
5CXG
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
2NCUVKE 5($ 2QNKUJ
)WKFG
4+)*6 .'(6
/WNVK
.QCF 6TCEGT