Nidek Medical ICE mini, Operator'S Manual

Page: 63 / 93

53
OPERATING PROCEDURES
:
Grooving Settings
2
• Depth
1) Press the Depth numeric button to display
the numeric keypad.
2) Enter the groove depth and press the Ent
button (unit: mm).
The depth value range is 0.0 to 0.8 mm.
• Width
1) Press the Width numeric button to display
the numeric keypad.
2) Enter the groove width values and press
the Ent button (unit: mm).
The width range is 0.6 to 1.2 mm.
4
After setting all grooving specifications, press
the SET button.
The
grooving setting screen
closes and the
specifications are saved.
• The default displayed in the Depth numeric button can be specified by setting the Groove
Depth parameter.
• The default displayed in the Width numeric button can be specified by setting the Groove
Width parameter.
• When the Curve setting is other than Auto or when the groove position has been changed,
confirm that the groove specifications are as desired by watching the simulated groove
section in the lens edger before processing lenses.
In the ICE mini, the groove specifications are set without measuring the lens curve. Therefore, the
set specifications may make the groove to be off the lens edge.
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩
ь㧩
Ǿ㧩
%WTXG
2QUKVKQP
&GRVJ
#KFVJ
5'6
#WVQ
%CPEGN
'PV
%'
%4
5CXG
0[NQT 5($ 2QNKUJ
)TQQXG
4+)*6 .'(6
/WNVK
.QCF 6TCEGT
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩
ь㧩
Ǿ㧩
%WTXG
2QUKVKQP
&GRVJ
9KFVJ
5'6
#WVQ
%CPEGN
'PV
%'
%4
5CXG
0[NQT 5($ 2QNKUJ
)TQQXG
4+)*6 .'(6
/WNVK
.QCF 6TCEGT
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩
ь㧩
Ǿ㧩
%4
5CXG
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
0[NQT 5($ 2QNKUJ
)TQQXG
4+)*6 .'(6
%WTXG
2QUKVKQP
&GRVJ
9KFVJ
5'6
#WVQ
%CPEGN
/WNVK
.QCF 6TCEGT
SET button