Nidek Medical ICE mini, Operator'S Manual

Page: 4 / 93

II
:
Use precautions
Before Use
CAUTION
• Do not use the instrument for other than the intended purpose.
NIDEK is not responsible for accidents or malfunctions caused by careless use.
• Never disassemble nor touch the inside of the instrument.
This may result in electric shock or malfunction.
• Install the instrument in an environment that meets the following conditions. The
following conditions must be maintained during use.
Use conditions
Temperature: +10 to +40
°
C
Humidity: 30 to 85% (Non-condensing)
Atmospheric pressure: 700 to 1060 hPa
A place with low dust
A place free of vibration and impact
• Avoid storing the instrument where it is exposed to rain or water, or poisonous gas or
liquid is present.
Corrosion or malfunction of the instrument may occur.
• Be sure to use a wall outlet which meets the power specification requirements.
If the line voltage is too high or too low, the instrument may not perform properly. Mal-
function or fire may occur.
• Connect the power plug to a ground outlet. Or connect a grounding wire to a ground
terminal.
Electric shock or fire may occur in the event of malfunction or power leakage.
• Completely insert the power plug into the outlet as far as the prongs will go.
Fire may occur if the instrument is used with a loose connection.
• Do not place heavy objects on the power cord.
The damaged power cord may cause fire or electric shock.
• Do not use the power cord other than supplied. Also do not connect the supplied
cord to any other instrument.
Malfunction or fire may result.
• Before connecting the cable, turn off the power switch and disconnect the power cord
from an outlet.
Malfunction of the instrument may result.
• Hold the base with both hands when carrying the instrument to another location.
Accidental dropping of the instrument may cause damage to the instrument and/or
cause bodily injury.