Nextel BlackBerry 6510, User Manual

Page: 267 / 296

Handheld error messages
Handheld User Guide 267
Registration request
failed - please try again This message appears if your attempt to register with the Nextel
wireless network has failed. Try registering again manually. Verify
that you are in an area of sufficient wireless coverage. You are in
an area of sufficient wireless coverage if
NXTL or NxTL and one or
more bars appear with the wireless coverage indicator in the
handheld status section of the screen. Refer to the
Getting Started
Guide for more information on registering your handheld.
Registration request sent This message confirms that the registration request reached the
network successfully, but the network has not responded.
Request for More failed This error message usually indicates that more of a particular
message cannot be obtained. Try requesting
More again. If you
continue to receive this message, the entire message can still be
read in your desktop email application.
Send cancelled by
transport This message indicates that the send process was cancelled
before it was complete. Resend the message.
Sending failed (please
resend and watch for
error message) This message usually appears either because of a network
registration problem or a connection failure between your
handheld and your computer. Resend the message and watch
your handheld for an error message. Refer to the explanation for
that specific error for details.
Temporary network
problem - please resend
later The Nextel wireless network is temporarily busy. Resend the
message later.
Temporary service
problem - please resend
later If this message appears, a temporary problem with the Nextel
wireless network is occurring. Wait before you send a message
again.
Text header field
truncated Your text field has exceeded 1024 characters. Only the first 1024
characters are used, but the message is saved.
Timeout - message not
delivered This message might appear several minutes after you send a
message to indicate that the message could not be sent. Resend
the message later.
Transport not registered This message appears if the radio code on your handheld is not
working properly. Reset your handheld by pressing the
Alt key +
the Shift key + the Backspace key.
Unknown command
byte There was a problem sending your message. Reset your handheld
by pressing the
Alt key + the Shift key + the Backspace key.
If you continue to receive this message, contact Nextel Customer
Care for more information.
Error Description