80
Rs232 TX:
Output, serial data
Rs232 RX
: Input, serial data
Input 7:
Input, door close sensor
Input 8:
Input, general use digital input
Input 9:
Input, from keypad security device
input 10:
Input, from door push bar
Portal Common:
Input, Sets logic level for inputs on Portal Connector. Connect to
Ground for Logic High (+12V=Trigger) on inputs. Connect to +12V for Logic Low
(GND = Trigger).
Relay 6 A&B:
Output, general purpose. Relay A-B Pair closes connection on trigger.
Encoder A/B:
Input, quadrate data from door position sensor
Lower Power Panel Connections
Figure 35 - Configure Connection
Input Voltage/Current
: 115/230 VAC, 50-60 Hz 10A @ 115VAC, 5A @ 230 VAC
Alarm Box Connectors
: Interface, Standard 10BaseT Cat-5 Ethernet cable to
Annunciator alarm boxes for each portal. For units with two Annunciator alarm box
jacks, the left-most one is for Portal-1 and right-most for Portal-2.
Summary of Contents for T-DAR T1000
