79
Lower Front Panel Connections
Phoenix Style connectors, left to right
Input 1
: Input, turns alarm off when triggered
Input 2:
Input, turns alarm off when triggered.
Relay 1-4 A&B:
Output, general purpose. Relay A-B Pair closes connection on
trigger.
Line Lock In:
Input, allows cameras to be synchronized with the lighting
Main Common:
Input, Sets logic level for inputs on General Connector. Connect to
Ground for Logic High (+12V=Trigger) on inputs. Connect to +12V for Logic Low
(GND = Trigger).
+12 Volt:
Output, 12V
Ground:
Output, System GND
Rs232 TX:
Output, serial data
Rs232 RX
: Input, serial data
Input 3:
Input, door close sensor
Input4:
Input, general use digital input
Input 5:
Input, from keypad security device
input 6:
Input, from door push bar
Portal Common:
Input, Sets logic level for inputs on Portal Connector. Connect to
Ground for Logic High (+12V=Trigger) on inputs. Connect to +12V for Logic Low
(GND = Trigger).
Relay 5 A&B :
Output, general purpose. Relay A-B Pair closes connection on
trigger.
Encoder A/B:
Input, quadrate data from door position sensor
Summary of Contents for T-DAR T1000
