71
Troubleshooting guides
This section provides fundamental hardware troubleshooting for the T-DAR. For
problems that are not covered in this section, contact your local Newton Security Inc.
Authorized Distributor.
Tips for getting a good image
♦
Make sure that the light is consistently illuminated across the inspection
area.
♦
Ensure the floor; walls and surrounding physical environment are free
from bright reflections.
Use Stereo Tracking Heads with longer focal lengths to produce more accurate
images. Check with your Newton Security Inc. Authorized Distributor
regarding
availability of Stereo Tracking Heads for special installations.
Lighting
The minimum acceptable amount of lighting for proper operation of the
T-DAR system is 30fc (foot candel) or 300lux measured approximately 48
inches above the floor and at arms length from the body. If the
lighting is below this level, it is required that the lighting be
increased to a level comparable to the guidance issued by the
Illuminating Engineer Society of North America (IESNA) for Performance
of Visual Tasks, High Contrast, which calls for approximately 30fc to
50fc (300 to 500 Lux).
Summary of Contents for T-DAR T1000
