Newton Security T-DAR T1000, Installation And Operation Manual

Page: 33 / 92

33
Stereo Tracking Head
The camera head can be mounted utilizing the mounting tabs that accommodate up
to a number 12 screw or a Newton MK200 ceiling mount kit designed to work in a
variety of applications such as drop tile ceiling or hard ceiling. Refer to the MK 200
manual addendum in this manual for specific details. Care should be taken to
ensure adequate access to the connection port on the side of the unit. Refer to
Figure 6 for unit dimensions.
1. Ensure that the stereo tracking head is mounted in the correct location
according to the chart in Figure 8.
2. Ensure that the view of the camera is not obscured by the Annunciator Unit or
any other objects such as exit signs or door closers/operators.
3. For each stereo camera head, install and terminate two video coaxial
connectors with BNC connectors. These cables should already have been
labeled to make them easily identifiable.
4. Attach the coaxial cables to the BNC 90 degree connectors on the inside of
the stereo camera head. The camera head can be opened by removing the
screws in the access plate of the unit.
5. Install and terminate one Ethernet cable (straight through) in the stereo
camera head.
6. Attach the Ethernet cable to the Power/Control connector on the stereo
camera head.
7. Ensure Camera 2 is closest to the secure door and Camera 1 is towards the
exiting side of the door
Annunciator Unit
The Annunciator Unit is mounted utilizing the mounting tabs that accommodate up to
a number 12 screw. Care should be taken to ensure adequate access to the
connection port on the top of the unit, as well as the volume control on the front of
the unit. The unit should be mounted at least eight feet above the finished floor.
Refer to Figure 4 for unit dimensions.
1. Ensure that the Annunciator Unit is mounted outside of the field of view of the
stereo camera head.
2. Install and terminate one Ethernet cable (straight through) on the Annunciator
Unit.
3. Attach the Ethernet cable to the annunciator connector on the Control Unit.