Newland NLS-EM20-EX, User Manual

Page: 80 / 187

Startup settings
5 Bit extension code
5 Bit extension code refers to the addition of the ordinary barcode 5 Digit barcode, the picture below shows the band 5 The barcode with bit extension code, the blue wire frame on the left is the ordinary
barcode, and the red wire frame on the right is 5 Bit extension code:
* * 【Don't read 5 Bit extension code
【Reading 5 Bit extension code
Assume Set to " Read 2 Bit extension code " or " Read 5 Bit extension code " Later, the scanner can read new barcodes composed of ordinary barcodes and extension
codes; it can also read ordinary barcodes without extension codes. Set as " Not read 2 Bit extension code " or " Not read 5 Bit extension code " Later, the part of the
extension code in the new bar code composed of the ordinary bar code and the extension code will not be read, and the part of the ordinary bar code can still be read normally.
Convert to EAN-13
will EAN-8 Convert to EAN-13 Type of barcode, then the barcode information is in accordance with EAN-13 The setting processing.
* * 【No conversion】
【Convert to EAN-13 】
70