Newland NLS-EM20-EX, User Manual

Page: 21 / 187

Startup settings
Reading mode
•
Level trigger mode: Press and hold the trigger key to start the code reading; after the code reading is successful or the trigger key is released, the code reading ends.
•
Induction mode: Power on and enter the barcode reading state until the barcode reading is successful or reaches One reading timeout Stop reading the code after the set time. When a new barcode appears, it will
Newly enter the reading state. In this mode, Reread delay It can be used to prevent the same barcode from being read multiple times. Sensitivity Can change the sensing mode of the light
Sensitivity.
•
Continuous reading mode: It has been in the state of code reading after power on. Press and release the button to switch the scanner between the reading state and the stopping state. At this
In this mode, the reread delay can be used to prevent the same barcode from being read multiple times. Code reading will stop when switching to this mode 3 Seconds, then
Enter the continuous reading state.
* *
【Level trigger mode】
【Induction Mode】
【Continuous reading mode】
11
Exit settings