Newland NLS-EM20-EX, User Manual

Page: 134 / 187

Startup settings
Add data format
step 1 : Read "Startup Settings";
step 2 : Read "Add Data Format";
【Add data format】
step 3 : Choose data format
Read Data code " 0 "or" 1 "or" 2 "or" 3 ", they respectively represent the selected data format 0 ~ 3 .
step 4 : Read sequentially Data code " 6 "" 9 "" 9 "" 9 "
step 5 : Select barcode number
The data format only works for the specified type of barcode. Reference appendix- Barcode serial number comparison table . The barcode serial number is determined by 3 Consists of several data bits. If
the set data format is valid for all barcode types, then set the barcode serial number to 999 . For example only for EAN-13 Do processing, then read Data code " 005 "
step 6 : Set barcode data length
The data format only works for barcodes of specified length. The data length is determined by 4 Consists of several data bits. For example, set the barcode data length to 32 , Then read Data code " 0032" . If
the set data format is valid for all barcodes with data length, then set the barcode length to 9999 .
step 7 : Set data format editing commands
Scan the data code to set the required data editing commands. For example, the data editing command is F141 , Then read Data code " F141 ". For detailed commands, please refer to Data format editing
commands .
step 8 : Read " save "Set the code.
124