Newland NLS-EM20-EX, User Manual

Page: 137 / 187

Startup settings
Single use data format
The single-use data format means that it only affects a barcode read after setting, and the data format used afterwards will be restored to the original data format. Can pass the following
The setting code selects the data format for single use. For example, the scanner has been set to select the data format 3 , But want to use the data format when reading a barcode 1 , In this case, you need
to scan the "Single Use Data Format" before reading that barcode. 1 "Set the code.
* *
【Single use data format 0 】
【Single use data format 1 】
【Single use data format 2 】
【Single use data format 3 】
Data format mismatch error sound
If the data format mismatch prompt sound is turned on, the scanner will emit an error sound when reading barcodes that do not meet the data format requirements.
【shut down】
* *
【Open】
127
Exit settings