Newland NLS-EM20-EX, User Manual

Page: 135 / 187

Startup settings
Add data format 0 , This data format only applies to data length 10 Byte Code 128 , Send the barcode data and add the character " A ", the setting steps are as
follows:
1.
read " Startup settings "
2.
read " Add data format "
3.
Add data format 0 ,read Data code "0"
4.
read Data code "6" "9" "9" "9"
5.
Code 128 Barcode serial number 002 ,read Data code "0" "0" "2"
6.
The barcode length is 10 Byte, read Data code "0" "0" "1" "0"
7.
Send after sending all data "A" , The corresponding data format compilation command is F141 ,read Data code "F" "1" "4" "1"
8.
read " save "
9.
read " Exit settings
"
Clear data format
There are two ways to clear the data format configuration, one is to read " Clear all data formats " Set the code to clear all data formats; the other is to read first " Clear a set of data formats " Set the code, and
then read the number of the data format that needs to be cleared Data code , Then read " save " Set code, clear 4 One group in the group data editing format configuration. For example, to clear " Data Format 2"
, First read " Clear a set of data formats " Set the code, then read the data code "2" , Finally read " save " .
【Clear all data format】
【Clear a set of data format】
125
Exit settings