Newland NLS-EM20-EX, User Manual

Page: 163 / 187

Startup settings
Modify custom suffix
Read first " Modify custom suffix " , And then read each byte in the suffix string to be set in sequence 16 Base value, read last " Save Settings " Complete the setting of the custom suffix. Note: The total length
of the custom suffix string cannot exceed 10 Characters.
【Modify custom suffix】
Set the custom suffix to "CODE" ( 16 The base value is 0x43/0x4F/0x44/0x45 ):
1.
read " Startup settings "
2.
read " Modify custom suffix " Set code
3.
Read the following data code: "4" "3" "4" "F" "4" "4" "4" "5"
4.
read " save " Set code
5.
read " Exit settings "
After this setting is completed, as long as the custom suffix is set to " Enable " , Then read any barcode, the scanner will add self
Define suffix string "CODE" .
153
Exit settings