Newland NLS-EM20-EX, User Manual

Page: 127 / 187

Startup settings
Data Matrix Double code
Data Matrix Double code: two arranged up and down or left and right Data Matrix Barcode. The direction of the two codes should be the same, the difference should be as small as possible, and the
distance should be as close as possible. The dual code setting is divided into the following three setting modes.
Read only single Data Matrix Code: The device only reads one at a time at any time Data Matrix Barcode
•
Read only double Data Matrix Code: The device must be detected at any time Data Matrix Double code, and the decoded information is sent after both codes are successfully decoded. The
sending order is from top to bottom or left to right.
•
Readable odd and even Data Matrix Code: Check first when reading codes Data Matrix Whether the double code exists, if it exists and decoded successfully, it will be sent according to the double
code, otherwise it will be treated as a single code.
* * [Read only single Data Matrix code】
[Only read double Data Matrix code】
【Readable odd and even Data Matrix code】
117
Exit settings