Newland NLS-EM20-EX, User Manual

Page: 121 / 187

Startup settings
Set reading length
The scanner can be configured to read only those whose length is between (including) the minimum and maximum length Aztec Barcode.
[Minimum length (default value: 1 )】
[Maximum length (default value: 3832 )】
The maximum length limit of any two-dimensional barcode shall not exceed 65535 Bytes, and the maximum length limit value must not be less than the minimum length limit value.
If you want to read only a fixed length Aztec Code Bar code, you can set the minimum length limit value to be equal to the maximum length limit value.
Limit the scanner to only read the smallest 8 Bytes, max 12 Byte Aztec Code Barcode:
1.
read " Startup settings "
2.
read " Minimum length "
3.
Read data code "8" (See appendix-data code)
4.
Read "Save" (see appendix-save or cancel)
5.
read " The maximum length "
6.
Read data code "1"
7.
Read data code "2"
8.
read " save "
9.
read " Exit settings "
111
Exit settings