Newland NLS-EM20-EX, User Manual

Page: 53 / 187

Startup settings
Unknown character tone
Due to differences in keyboard layouts, some characters contained in the barcode data may not be available on the selected keyboard. Therefore, the scanner cannot transmit unknown characters. Scan down
The corresponding barcode on the face to enable or disable the beep sound when an unknown character is detected.
* * 【shut down】
【Open】
Assume that the language corresponding to the current scanner’s virtual keyboard system is French (numbered 7 ), the content read by this scanner is "AÐF" Barcode. by
A character in the barcode data "Ð" ( 0xD0 ) Is not in all the available keys of the French keyboard, so the scanner will skip this
The unknown character continues to process the next character.
From the actual use situation, if the unknown character beep is set to " shut down " , The scanner will transmit to the
The data of the data receiving host is "AF" ；
If the unknown character beep is set to " Turn on " , The scanner emits an error tone when processing this character, and transmits it to the data receiving host’s
The data is still "AF" .
If opened " Keyboard emulation input characters " Function, this function is invalid.
43
Exit settings