Newland NLS-EM20-EX, User Manual

Page: 14 / 187

Startup settings
Chapter 3 System Settings
Introduction
There are three ways to set up the scanner:
Set code
The scanner sets options and functions by reading a series of special barcodes. In the following chapters, we will introduce in detail the options and functions available for setting and provide corresponding
Set the code.
This method of setting and reading is relatively straightforward. Since each setting code needs to be read manually, it is easy to make mistakes.
Set command
The host can send a setting command string to set the scanner. In the following chapters, in addition to introducing the setting code, we will also introduce the setting command string.
The scanner can be set up automatically using the setting command. The user can develop a set of software to load all relevant setting data into the scanner.
EasySet Set up
EasySet Is a Windows The image user interface program under the system is independently developed by Newland Automatic Identification Company for bar code reading and processing. use
EasySet You can view the decoded barcode information and the image taken by the scanner, and you can also set the scanner easily.
This setting method is very similar to the setting command. EasySet It is specially designed for the products of Newland Automatic Identification Company.
Tip: Except for some temporary settings that will disappear after the device is restarted or powered off, other function settings will be stored in the scanner and will not be lost due to shutdown.
4