MANUAL
Doc. HBE090-3
Installation and User Manual EVOSTYLE N.G.
Mod. MQI006-0
NEW LIFE RADIOLOGY S.R.L. Corso Giuseppe Canonico Allamano 13/15 INT.G - 10095
Grugliasco (TO) Italy Phone and fax + 39.011. 781994 [email protected]
www.newliferadiology.it
57
Manufacturer responsibility
The manufacturer is responsible for the effects of safety, reliability and performance
of the equipment only if:
assembly and any intervention on the equipment have been made by specialists
;
if the environment electrical system in which the equipment is installed is in
compliance with current standards in the field of plant safety;
if the equipment is used in accordance with use
Parts of input and output signal
It is not provided for the equipment connections with other parts of entry and exit signal
outside.
Cleaning and disinfection of the unit and the parts in contact with
the patient
You should always disconnect the unit from the mains power supply before starting
cleaning activities and / or disinfection.
The method used for disinfection must meet the regulations and the recommendations
in force, including those regarding the prevention of risks of explosion.
Cleaning and disinfection of the parts in contact with the patient
The parts in contact with the patient are represented by the cone collimator (cod.
CL01). This part should be carefully disinfected after the use through disposable
disinfectant wipes category "medical surgical".
Cleaning and disinfection of the unit
For these operations can be used a cloth moistened with neutral water-based
detergent products. Make sure that no liquid seeps inside the equipment because it
may cause short circuits and corrosion. Do not use abrasive polishing.
The accessories and connection cables must be disinfected only with a cloth soaked
in disinfectant solution. Do not use solvents or corrosive disinfectants.
